Model NO.: SDPD Object: Oil Operating Type: Continuous Type Centrifuge Type:
Disc Centrifuge Condition: New Application: Do,Fo,Lo,Waste Oil Treatment Trademark: Hongji Origin: China Type: Separating Plant Separation Mode: Sedimentation Type Installation: Vertical Pressure: Low Pressure Structure: Same as Alfa Laval′s Sludge Discharge: Automatically and Fully Specification: CE, ISO Large Volume 3 phase Disc Marine Centrifugal Oil Separator With Heater , Pumps Advantages 1. Overload over heat protection
2. High rotating speed
3. Accurate dynamic balancing
4. Long time with low vibration
5. Safety and security
6. CE, CCS Description Model SDPD disc separator is mainly used to remove water and mechanical impurities from fuel oil, lubricating oil and other mineral oil in marine diesel engine unit and land-used diesel generator unit of power station so as to reduce wear of the diesel engine and other machine, and prolong engine life. The model is also used to separate two unsolvable liquids with different specific gravity or remove small amount of solid particle from liquid. The machine adopts automatic control, it has the advantages of high efficiency, low oil consumption, convenient operation and economic maintenance cost. The clear oil and dirty water are pumped out by centripetal pump, the sludge is discharged automatically and fully. The machine is one kind of rotary machine with high speed, After accurate dynamic balancing, it can run for long time with low vibration, safety and security. Disc centrifuge, disc separator -Whole unit With heater, pumps, valves,frames, control panel etc. Main Technical Specification Condition for mineral oil separation and actual capacity (refer to the chart)
oil types | heavy diesel oil | lubrication oil |
SAE30, 40 | detergence oil | steam turbine oil |
kinematical viscosity(mm2/s) | 13 | 20.5 | 36.2 | 80 | 100-120 | 61.2-74.8 |
50°C | 40°C | 40°C |
density/(kg/m3)(20°C) | less than 900 | 900-991 | 880-900 | less than900 |
| separating temperature (°C) | 40 | 60 | 80 | 80-95 |
| recommended capcity (L/h) | 900-5000 | 300-4500 |
oil types | Fuel oil |
Fuel oil | Heavy fuel oil |
kinematical viscosity(mm2/s) | 1.9-5.5 | 5.5-24 | 120 | 180 | 380 |
40°C | 50°C |
density/(kg/m3)(20°C) | less than 900 | 900-991 |
| separating temperature (°C) | Normal temperature,40-60degree best | 90-98 |
| recommended capacity (L/h) | From 650L/H to 5000L/H depends on different oil and working temperature. |
Note:Refer to the aboved chart ,we will provide suitable capacity separator.
Contact us if you need more details on 3 Phase Disc Marine Centrifugal Oil Separator. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Marine Centrifugal Oil Separator、Centrifugal Oil Separator. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Disc Centrifuge
