Model NO.: GF Object: Liquid-Solid or Liquid-Liquid-Solid Operating Type: Intermittent Type Centrifuge Type:
Disc Centrifuge Condition: New Voltage: Design for Different Country Specification: ISO9001-2000 Type: Centrifuge Separation Mode: Sedimentation Type Installation: Vertical Pressure: Low Pressure Material Quality: 304/316stainless Steel Trademark: HJ Origin: Liaoning Application Scope:
The centrifuge separator is used for waste oils. It can be used for separating the waste oil from the water and solid.
GF
Tubular Centrifuge Separator is used for separating various kinds of liquids that are difficult to be separated, especially suitable for liquid-liquid separation and liquid-liquid-solid separation.
It is a high-speed centrifuge with strong separating capacity. The bowl of the centrifuge rotates around its axis and forms a strong centrifugal force, the centrifugal force separates the suspensions into liquids and solid.
The suspension is fed through the bottom into the hollow cylindrical rotor which has two outlets at the top to allow the discharge of the separated liquids. The lighter liquid and the heavier liquid will flow out from the respective liquid outlets. At the same time the solids are deposited on the bowl's wall and the accumulated solids are cleaned out manually from the bowl when the centrifuge is shut down.
The parts contact with the material is made of stainless. The machine body can be stainless or iron casted with painting according to the material to be separated or the requirement of the customer.
The capacity of the
Tubular Centrifuge separators is from 10L/h to 3000L/h depending on the different type of the tubular centrifuges
and the dencity of the mixtrure to be separated.
The centrifuge separator is suitable for waste oil separation.?
Main Features:
The high speed Tube Centrifuge is the equipment works with high separation factor and capacity, little space and easy operation, with low noises, it is extremely convenient to maintain.
Working Principle:
This separator is a high-speed separator, with strong separating capacity, as an intermittently operated centrifugal equipment, composed of the main body, driving unit, bowl, liquid collector tray, and feed liquid bearing seat. The upper part of the bowl is the flexibility spindle and the lower part is the floating damper bearing. The spindle is coupled by coupling seat buffer and the driven wheel. The motor passes the dynamic force to the driven wheel through driving strap and tension pulley, thus for the bowl to rotate around its own axis at high speed, to form a strong centrifugal force field. The material is injected inside from the liquid inlet on the bottom. The centrifugal force compels the material liquid to flow upwards along the inner wall of bowl, and to be separated due to densities of different ingredients of material liquid. GF model is a separating equipment where there the liquid phase of large density is formed into outer ring and the liquid phase of small density is shaped into inner ring, to flow to the top of bowl, to be discharged out from their respective liquid outlets. The micro solids settle on the wall of the bowl and are to be manually discharged after the machine is shut down.
Schematic:
| Type | GF80 | GF105 | GF125 | GF150 |
Inner diameter of bowl(mm)_ | 75 | 105 | 125 | 147 |
:
Efficient height of bowl | 450 | 730mm | 730 | 730 |
:
Available volume of bowl | 2.67 | 6L | 8L | 10L |
:
The highest speed of bowl(R/min) | 21000 | 19000 | 17500 | 16000 |
:
The biggest separating factor | 22500 | 21,000 | 21,000 | 21,000 |
:
The diameter of charging nozzle | 3/4/6 | 4,6,8mm | 4/6/8/10 | 8/10/12 |
:
The pressure of charging inlet | 0.05~0.15MPa |
Capacity | 670L/h.
| 1600L/h.
| 2200L/h.
| 3200L/h.
|
Motor | 1.5 | 2.2kw | 3.0kw | 3 |
(mm)
Dimenstion | 500*600*1300 | 500*600*1650 | 500*600*1650 | 500*600*1650 |
(kg)
Machine weight | 300 | 460 | 490 | 510 |
FAQ
1.Is your price competitive? My price is not the lowest in China as for high quality,but we promise for the same quality and collocation,my price is the most favorite,for the same price ,my quality is definitely superior.to other brand. 2.Do you have OEM service?Do you supply the parts? Yes,we do,as long as you provide us your drawing and detailed requirements. 3.Do you have agent or service center in my country? We have some partnership in several countries as Indonesia,Brazil,USA etc,you are warmly welcomed to work as our agent,at this moment,we have no service centers abroad,but we can provide overseas spot and online technical service in time. 4.How can we easily find out the most fit centrifuges? We have experienced engineer team to help you make the model selection,as long as you provide us the detailed processing material characteristics. 5.What payment mode you accept? TT , LC at sight or others . Note: The prodcution capacity is based on water only, just for reference. Different feeding solution will of different production capacity. If you have special requirements, please feel free to contact us. Contact Information: Contact name: Jessie Zhao Phone: +86-18641998048
Whats App:+8618641998048
Skype:+8618641998048
Wechat:18641998048
Contact us if you need more details on Waste Oil Centrifuge. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Waste Oil Separator、Waste Oil Machine. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Tubular Centrifuge
FAQ
